TROUBLE SHOOTING
Due to the cleaning of the compressed air the impurities are get stagnated at the bottom of the air filter. The problems may be occurs due to the stagnation of more impurities in the air filter. The stagnated impurities should be removed. the impurities must be drained off before it raises to the maximum level mark otherwise the outlet air stream would again contain droplets of moisture and cancel ou the separation effect.
The lubrication of air is done in the lubricator. the following points are to be taken care while lubricating.
1. The lubricator only start working when the airflow reaches a certain rate, the special attention must be paid to maintain the minimum flow rates specified bt the lubricator manufactures.
2. Use the specified grades of oil for lubrication.
3. The refilling must be done only after shut off the air stream.